Is the dishwasher in your kitchen broken? Or it has been old and you want to change it with the new one? It is very simple. You can do yourself in your spare time. By doing it yourself, you can get many advantages. It is not only cheap but you will be on the top of satisfaction. Master how to install dishwasher and do all the steps one by one.
Let’s start knowing the ways how to install dishwasher. Arriving at home from the store, you can take new dishwasher out of the box and lay it face down so the back is visible. Make sure that all of the connections are there.
Then, you can take the cap off the drain line connection at the dishwasher. Attach the drain line to the dishwasher. The next way is threading the drain line into the hole under the sink. Use pliers; crimp the clamp around the hose to secure.
Continue by putting the dishwasher under the countertop. To do that, you can slide the new dishwasher under the countertop. Level the countertop by adjusting the height of the legs with a wrench and secure the dishwasher to the countertop with screws. When it has done, re-attach the wires of the same color. Screw on wire nuts and wrap with electrical tape.
Place the copper ground wire under the green-round screw then tighten down. Make sure that you verify the power is still off at the breaker before reattaching it. Next, attach the dishwasher supply line to the dishwasher. Tighten with a wrench. Once you have finished it, you can turn on the water under the sin.
Attach the drain line to the plumbing system. After that, tighten the clamp around the hose. Turn the power on at the breaker. And you can check it as the finishing. Those are really simple. You can do all the steps on how to install dishwasher yourself. Try them out!