How to Replace Kitchen Faucet

Is your kitchen faucet broken? Do you have to replace it with the new one? You don’t need to call a painter to help your project. Just do it yourself. You can finish it on your weekend so that it will not bother your work. Learn how to replace kitchen faucet and you can do them at home.

How to replace kitchen faucet? The steps will be told here. First, you must shut off the water. Turn off both hot and cold water supply valves. It is usually located directly under the sink. Open the tap to drain off the water.

Then, you can begin removing the old kitchen faucet. Use an adjustable wrench to disconnect both faucet water lines from the supply tubes and reach up behind the sink and disconnect the locknuts that hold the faucet to the sink using a basin wrench to.

Lift the old faucet out of its mounting hole. And it is time for you to install the new kitchen faucet. Get the new faucet and the other things out from the box. Today it is usually completed with a gasket.

Assemble the new faucet with the gasket according to the manufacturer’s instructions. Insert the faucet tailpiece, its water lines and spray hose, if provided, into the center hole on the back of the sink. After that, screw the mounting nut to the faucet tailpiece and tighten with a basin wrench under the sink.

Connect the spray hose to the faucet tailpiece. Attach the provided lead weight to the hose to keep it from tangling. The next step is by reattaching the supply tubes to the faucet water lines. Don’t forget to install the hot water on the left and the cold one on the right.

Tighten the water line nuts and open the shutoff valves. If any water leaks out through one or both nuts, tighten the nut an additional one-quarter turn. Your project is finished. That’s how to replace kitchen faucet in your house. Be more independent by doing anything you can yourself.

Leave a Reply

Your email address will not be published. Required fields are marked *