How to Tile a Backsplash

Keep the cleanness of the kitchen by presenting a backsplash. Choose the best materials for it. There are many kinds of material which you can use there. One of them is tile. It is one of good materials for a backsplash. It is easy to be cleaned so that you will not spend your much time just for removing the stains there. It is also durable.

You will change it with the new one in long time. If you think about the beauty of the kitchen, you don’t need to worry about that. Tile has many varieties of pattern and colors. You can choose the most beautiful one. When you have got it, you can install them on the wall. Do yourself. Learn how to tile a backsplash before working with the project if you are not sure with your own ability.

Begin doing the first way on how to tile a backsplash by checking the wall. Make sure that it is dry and clean. Then, you can install the tiles. Turn off the power to electrical outlets and clean the area with warm water and allow it to dry. Apply the manufacturer’s recommended adhesive with a notched trowel. Hold the trowel at a 45-degree angle and spread a very thin layer. Lay the first tile in the center at the base of the backsplash.

Position the tile using a slight twisting motion. Use a level to make sure the tile is square. Give a spacer on each corner of the first tile. Cut one end of the spacers off as you need. Push the spacers into the adhesive. Continue laying the tiles in a row, flush to the spacers till the end. Apply adhesive as needed. When you’ve install all the tiles, wipe off any excess adhesive with a damp cloth.

Use a rounded stick to clean between the tiles. Then, apply the grout using a rubber float. Spread the grout diagonally at a 45-degree angle across the tiles, packing the grout between the tiles. Wipe off the excess grout using a damp sponge. It has finished. You have known how to tile a backsplash. Now, try to do them at home.

Leave a Reply

Your email address will not be published. Required fields are marked *